NEC Univerge SV8100 Features And Specifications Manual page 1907

UNIVERGE SV8100
Program
Program Name
Number
47-06-06 Group Mailbox Subscriber
Options – Message Waiting
Lamp
47-06-07 Group Mailbox Subscriber
Options – Auto Attendant Do Not
Disturb
47-06-08 Group Mailbox Subscriber
Options – Forced Unscreened
Transfer
47-06-09 Group Mailbox Subscriber
Options – Auto Time Stamp
47-06-10 Group Mailbox Subscriber
Options – System Administrator
VM8000 InMail
Description/Comments
Enable/Disable Message Waiting
lamp at the extension associated
with the Subscriber mailbox. For
Subscriber Mailboxes, you should
enable this option. For Guest
Mailboxes, you should disable this
option.
Enable/Disable Auto Attendant Do
Not Disturb. When a subscriber
enables Auto Attendant Do Not
Disturb, an Automated Attendant
caller routes directly to the
mailbox, hears the greeting, and is
asked to leave a message. A
subscriber can also enable Auto
Attendant Do Not Disturb while
recording their mailbox greeting.
Enable/Disable Automated
Attendant Forced Unscreened
Transfer for the Subscriber
Mailbox. If enabled, each
Screened Transfer (TRF) to the
extension is converted to an
Unscreened Transfer (UTRF). If
disabled, Screened Transfers from
the Automated Attendant occur
normally.
Enable/Disable Auto Time Stamp
for the Subscriber Mailbox. If
enabled, after the subscriber
listens to a message VM8000
InMail announces the time and
date the message was left. Auto
Time Stamp also announces the
message sender (if known).
A subscriber can also enable Auto
Time Stamp from their mailbox.
Designate the Subscriber Mailbox
as a System Administrator. This
allows the subscriber to use the
options after logging into their
mailbox.
Assigned Data
1
0 = Disable
1 = Enable
(default = 1)
0 = Disable
1 = Enable
(default = 0)
0 = Disable
1 = Enable
(default = 0)
0 = Disable
1 = Enable
(default = 0)
0 = Disable
1 = Enable
(default = 0)
Issue 13.0
Level
2 3





2 - 1873