Throttle Body Disassembly And Assembly - Suzuki RMX450Z Service Manual

1D-17 Engine Mechanical:

Throttle Body Disassembly and Assembly

Refer to "Throttle Body Removal and Installation"
(Page 1D-15).
Disassembly
1) Remove the fuel hose (1).
2) Remove the starter knob/idle screw (2).
CAUTION
!
Be sure to disconnect the fuel hose (1) by
hand. Do not disconnect the fuel hose (1)
with any tool.
Do not turn the starter knob/idle screw (2)
unless it is necessary.
2
3) Remove the TP sensor (3) using the special tool.
NOTE
Prior to disassembly, mark the sensor
original position with a paint or scribe for
accurate reinstallation.
Special tool
: 09930–11950 (Torx wrench (T25H))
BA02J21406014
1
IA02J1140153-01
3
IA02J1140154-01
4) Remove the L-joint (4).
4
5) Remove the fuel pipe (5) along with fuel injector (6).
6
5
6) Remove the fuel injector (6) from the fuel delivery
pipe (5).
6
7) Remove the plate (7), IAP sensor (8) and O-ring (9).
7
8
IA02J1140155-01
IA02J1140156-01
5
IA02J1140157-01
9
IA02J1140158-01