Disassembly And Assembly - Suzuki RV50 Service Manual

oil
18. Removing pump cover
Required tool:
� big size
CD Oil pump cover
19. Disconnecting oil pump cable
Disconnect the oil pump cable at the oil pump
control lever by removing the cable end as shown
in the illustration.
CDOil p um p control lever (Z)Cable end
20. Removing engine mounting bolts
Required tool:
12mm and
�
'tightening torque:
;so "'
250 kg-cm ( 11 "' 18 ft-lb)
CD En g ine mountin g bolt
PULL

Disassembly and Assembly

This section explains the work necessary for sepa­
rating the crankcase,
engine, take the f o llowing steps. For reassembling
the engine after inspection or repair, f o llow the
reverse order of disassembly.
1. Draining transmission oil
Required tool:
or ====1 21 mm
Place the engine on the working bench and drain
out transmission oil by removing the drain plug.
2. Removing left crankcase cover
Required tool:
====a:r: big size
Before removing the left crankcase cover, remove
the gear shifting lever.
<D Left crankcase cover
3. Removing flywheel rotor fixing nut
Required tool:
and
Special tool
-#09930-40113
When disassembling the
17mm
23