NEC Univerge SV8100 Features And Specifications Manual page 1712

Issue 8.01
Program
Program Name
Number
47-20-05 Station Mailbox Message
Notification – Notification
Number
47-20-06 Station Mailbox Message
Notification – Notification Busy
Attempts
47-20-07 Station Mailbox Message
Notification – Notification RNA
Attempts
2 - 1684
Description/Comments
For the selected entry (1-5), use
this option to set the telephone
number (16 digits maximum)
Message Notification will dial to
notify the subscriber of new
messages. Enter the number
exactly as you want the system to
dial it (including a leading 1 for toll
calls, if required), but do not
include a line access code (such
as 9). If the number you enter is
extension number, it will be an
Intercom call. Otherwise, it will be
an outside call. (The system
decides by referring its numbering
plan.)
There are five separately
programmed Message notification
entries for each Subscriber
Mailbox.
For the selected entry (1-5), use
this option to set how many times
InMail will retry an incomplete
Message Notification callout to a
busy destination. This option
applies to pager and non-pager
callouts. If the Busy Attempts and
RNA Attempts are both met, the
notification callout to the selected
entry is cancelled.
There are five separately
programmed Message notification
entries for each Subscriber
Mailbox.
For the selected entry (1-5), use
this option to set how many times
InMail will retry an incomplete
Message Notification callout when
the destination does not answer.
This option applies to pager and
non-pager callouts. If the Busy
Attempts and RNA Attempts are
both met, the notification callout to
the selected entry is cancelled.
There are five separately
programmed Message notification
entries for each Subscriber
Mailbox.
VM8000 InMail – Cascade Message Notification
UNIVERGE SV8100
Assigned Data
1
Valid number up to 16
digits
(default not assigned)

1-99 Attempts
(default = 5)

1-99 Attempts
(default = 5)

Level
2 3