NEC Univerge SV8100 Features And Specifications Manual page 1892

Issue 8.01
For this feature...
1
Except where indicated, dial Service Code from intercom dial tone (e.g., press idle Speaker first).
Do Not Disturb
Door Box
E911
Flash
Forced Trunk
Disconnect
Group Call Pickup
Handsfree
Answerback/Forced
Intercom Ringing
3 - 18
Table 3-3 Service Codes by Feature (Continued)
Dial this Service Code...
747 +
0 (Cancel)
1 (Trk calls)
2 (Paging, ICM, Call
Forwards, and Transfers)
3 (All calls)
4 (Call Forwards)
702 + Door Box (1~4 or
1~8)
722
786
#3
3 (after #9 + 1~8 or

001~200 + busy)
#

768 + pickup group (1~8 or
1~9 or 01~64)
769
1 (Off-Hook)
721
723
1
When you ...
Activate Do Not Disturb.
Place a call to a door Box.
Forward a Door Box off-premise.
Turn off the E911 alarm.
Flash a trunk from an SLT.
Disconnect a call in progress on a
trunk.
Pick up a call ringing an extension in
your own pickup group (except Ring
Group calls).
Answer a call ringing a telephone in
another pickup group.
Answer a call ringing a telephone in
another pickup group if you do not
know the group number (except Ring
Group calls).
Change the signaling mode of your
outgoing Intercom call.
Enable Handsfree Answerback for
incoming Intercom calls.
Enable Forced Ringing for incoming
Intercom calls.
UNIVERGE SV8100
Also see
Function
Key...
-
-
-
-
-
-
24
26 + group
25
-
-
-
Codes Tables