Voice Response System (Vrs) Embedded Vrs - NEC Univerge SV8100 Features And Specifications Manual

Hide thumbs Also See for Univerge SV8100:
Table of Contents

Advertisement

UNIVERGE SV8100

Voice Response System (VRS) Embedded VRS

Enhancements
This feature added with Version 4000 (4.01 or higher).
Description
Embedded VRS provides one channel of VRS without having the PZ-VM21 (VMDB) and CompactFlash
installed on the CPU, therefore allowing the voice prompt to be saved on flash memory on the CPU
(Embedded VRS). This feature is disabled when the InMail CompactFlash is installed.
The following applies to the Embedded VRS Feature:
Number of VRS channels: 1
Number of VRS Prompts: 4
Maximum of eight minutes recording time, including stored VRS and outside caller messages.
Maximum number of outside caller messages that can be stored: 10
Available in US English, Mexican Spanish and Canadian French only.
When an outside caller leaves a message, the operators extension will show VOICE MESSAGE and the
number of messages in the lower left of the LCD display. The message waiting LED does not light for
these messages.
Conditions
Up to four ACD Delay Announcements are supported.
ACD queue depth announcements are not supported when using Embedded VRS for ACD
delay Announcement. If enabled, the first ACD Delay Announcement repeats continuously.
When all 10 messages have been recorded or if all eight minutes of the recording time has
been used, auto attendant callers will be dropped without notification when trying to leave a
message.
The following full VRS features are not supported on Embedded VRS:
General Message
Transfer to the VRS
Voice Prompting Messages
Voice Response System (VRS) Embedded VRS
Issue 8.01
2 - 1789

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents