NEC Univerge SV8100 Features And Specifications Manual page 1741

UNIVERGE SV8100
Related Features
None
Guide to Feature Programming
The Level 1, Level 2 and Level 3 columns indicate the programs that are assigned when programming
this feature in the order they are most commonly used. These levels are used with PCPro and WebPro
wizards for feature programming.
Level 1 – these are the most commonly assigned programs for this feature.

Level 2 – these are the next most commonly assigned programs for this feature.

Level 3 – these programs are not often assigned and require an expert level working knowledge of

the system to be properly assigned.
Program
Program Name
Number
11-11-13 Service Code Setup (for Setup/
Entry Operation) – Display
Language Selection for Multiline
Terminal
11-11-68 Service Code Setup (for Setup/
Entry Operation) – IntraMail
Language Selection for own
Extension
11-11-69 Service Code Setup (for Setup/
Entry Operation) – IntraMail
Language Selection for Specific
Extension
20-13-53 Class of Service Options
(Supplementary Service) –
Language Selection for Specific
Extension
Operation
VM8000 InMail – Language Setting
Description/Comments
If needed, redefine the service
code used to select the language
for display multiline terminals.
This setting is needed if the dial
access code to this feature is
desired.
This setting is needed if the dial
access code to this feature is
desired.
This setting must be Enabled (1)
for a telephones Class of Service
for this feature to function.
Assigned Data
1
MLT
(default = 678)
MLT
(default not assigned)
MLT
(default not assigned)
0 = Disabled
1 = Enabled

(default = 0)
Issue 8.01
Level
2 3



2 - 1713