NEC Univerge SV8100 Features And Specifications Manual page 1710

Issue 8.01
Program
Program Name
Number
47-01-14 VM8000 InMail System Options –
Number of Callout Attempts
47-02-23 InMail Station Mailbox Options –
All Message Notification Enabled
47-06-21 Group Mailbox Subscriber
Options – All Message
Notification Enabled
47-20-01 Station Mailbox Message
Notification – Notification
2 - 1682
Description/Comments
Notify Call Attempt
With Cascade Pager Notification:
Set how many times a mailboxes
enabled pager notification
destinations are tried. For
example if 47-01-14 is set to 10
and a mailbox has 5 enabled
pager destinations and each
destination has three retries for
BNA/RNA (47-20-06 and
47-20-07). The InMail will call
each destination three times and
will retry all the enabled
destinations 10 times. This means
each enabled destination will be
called a total of 30 times (10 x 3).
With Normal Pager Notification
Set how many attempts SV8100
InMail retries an incomplete
Message Notification callout. This
total includes unacknowledged
callouts, callouts to a busy
destination, and callouts to an
unanswered destination. This
option applies to pager and
non-pager callouts.
Use this option to enable or
disable notification for the
subscriber mailbox. If disabled,
enabling the individual notification
entries has no effect.
Use this option to enable or
disable notification for the group
mailbox. If disabled, enabling the
individual notification entries has
no effect.
For the selected entry (1-5), use
this option to enable or disable
Message Notification. If enabled,
notification will occur when the
mailbox receives a new message
according to the settings for Type,
Start Hour, End Hour, and
notification Phone Number. If
disabled, Message Notification will
not occur.
There are five separately
programmed Message notification
entries for each Subscriber
Mailbox.
VM8000 InMail – Cascade Message Notification
UNIVERGE SV8100
Assigned Data
1
1~99 (rings)
(default = 5)

0 = Disabled
1 = Enabled
(default = 1)
0 = Disabled
1 = Enabled
(default = 1)
0 = Disabled
1 = Enabled
(default = 0)

Level
2 3

