NEC Univerge SV8100 Features And Specifications Manual page 1840

Issue 8.01
Required Component(s)
None
Related Features
Electra Elite IPK Terminals
SV8100/SV8300 Terminals
Off-Hook Signaling
Guide to Feature Programming
The Level 1, Level 2 and Level 3 columns indicate the programs that are assigned when programming
this feature in the order they are most commonly used. These levels are used with PCPro and WebPro
wizards for feature programming.
Level 1 – these are the most commonly assigned programs for this feature.

Level 2 – these are the next most commonly assigned programs for this feature.

Level 3 – these programs are not often assigned and require an expert level working knowledge of

the system to be properly assigned.
Program
Program Name
Number
15-02-27 Multiline Telephone Basic Data
Setup – Handset Volume
2 - 1812
Description/Comments
Determine how an extension
handset volume is set after it is
adjusted during a call.
When 1 is assigned , and a user
sets the volume to maximum, it is
reset to a level to meet FCC
standards when the user hangs
up.
UNIVERGE SV8100
Assigned Data
1
0 = Back to Default
(Back)
1 = Stay at previous
level (Stay)
(default = 1)
Volume Controls
Level
2 3
