NEC Univerge SV8100 Features And Specifications Manual page 1656

Issue 8.01
Program
Program Name
Number
47-06-04 Group Mailbox Subscriber
Options – Message Retention
47-06-05 Group Mailbox Subscriber
Options – Recording
Conversation Beep
47-06-06 Group Mailbox Subscriber
Options – Message Waiting
Lamp
47-06-07 Group Mailbox Subscriber
Options – Auto Attendant Do Not
Disturb
2 - 1628
Description/Comments
Determine how long a Subscriber
Mailbox retains held and saved
messages. If a message is left in a
Subscriber Mailbox longer than
this interval, VM8000 InMail
deletes it.
Enable/Disable the Conversation
Record beep. If enabled, all
parties on a call hear the voice
prompt Recording followed by a
single beep when the extension
user initiates Conversation
Record. If disabled, the voice
prompt and beep do not occur.
When you disable the
Conversation Record beep, the
following voice prompts do not
occur while VM8000 InMail
records the conversation:
Recording (followed by a beep)
That mailbox is full (if the mailbox
message storage capacity is
reached).
You have reached the recording
limit (if the recorded message is
too long).
The SV8100 telephone system
software provides an additional
Conversation Record beep. This
beep repeats according to the
setting of Program 45-01-06:
Voice Mail Integration Options:
Record Alert Tone Interval Time.
Enable/Disable Message Waiting
lamp at the extension associated
with the Subscriber mailbox. For
Subscriber Mailboxes, you should
enable this option. For Guest
Mailboxes, you should disable this
option.
Enable/Disable Auto Attendant Do
Not Disturb. When a subscriber
enables Auto Attendant Do Not
Disturb, an Automated Attendant
caller routes directly to the
mailbox, hears the greeting, and is
asked to leave a message. A
subscriber can also enable Auto
Attendant Do Not Disturb while
recording their mailbox greeting.
UNIVERGE SV8100
Assigned Data
1
1~90 days
0 (Indefinite)
(default = 0)
0 = No (Disable)
1 = Yes (Enable)
(default = 1)
0 = Disable
1 = Enable
(default = 1)
0 = Disable
1 = Enable
(default = 0)
VM8000 InMail
Level
2 3



