NEC Univerge SV8100 Features And Specifications Manual page 1713

UNIVERGE SV8100
Program
Program Name
Number
47-20-08 Station Mailbox Message
Notification – Notification
Security
47-22-01 Group Mailbox Notification
Options – Notification
47-22-02 Group Mailbox Notification
Options – Notification Begin
Hour
VM8000 InMail – Cascade Message Notification
Description/Comments
For the selected entry (1-5), use
this option to enable or disable
Security Code protection for the
callout. If enabled, the user is
required to enter their security in
order to log on and hear the new
message. If disabled, the Security
Code is not required.
There are five separately
programmed Message notification
entries for each Subscriber
Mailbox.
For the selected entry (1-5), use
this option to enable or disable
Message Notification. If enabled,
notification will occur when the
mailbox receives a new message
according to the settings for Type,
Start Hour, End Hour, and
notification Phone Number. If
disabled, Message Notification will
not occur.
There are five separately
programmed Message notification
entries for each Group Mailbox.
For the selected entry (1-5), use
this option to set the hour when
Message Notification will start.
Notification will occur only for new
messages received between this
setting and the End Hour setting.
This entry is in 24-hour (military
time). For example, 08 is 8:00 AM
and 20 is 8:00 PM. For 24-hour
notification, make the Start Hour
the same as the End Hour.
There are five separately
programmed Message notification
entries for each Group Mailbox.
Assigned Data
1
0 = Security code not
required
1 - Security code
required
(default = 0)

0 = Disabled
1 = Enabled
(default = 0)
0-23 (24 Hour Clock)
(default = 0)
Issue 8.01
Level
2 3


2 - 1685