UNIVERGE SV8100
Ten Different Ring Tones
Ring tones can be selected in the tone setup menu and press OK.
Microphone Mute
Press
while the telephone is off-hook to mute the microphone.
Caller ID Presentation
Headset Connection
R-Key for Transfer and Special Services
When off-hook, press R to Recall, transfer.
Display Enhancements with Version 4000 (4.01 or higher) Software
With Version 4000 (4.01 or higher) software, the SIP DECT handset can now receive the calling party
name on an incoming internal/external call. The priority for the display is as follows:
If calling from a standard SIP terminal
1.
Program 15-05-04 nick name.
2.
Program 15-01-01 extension name.
3.
Calling name from originating standard SIP caller.
4.
Extension number.
If calling from an SLT, DT300 (including virtual extensions) or a DT700
1.
Program 15-01-01 Extension name.
2.
Extension number.
If calling from a trunk, (i.e. SIP trunk, ISDN, Analog C.O.)
1.
Calling party name of incoming trunk. (Caller ID information).
2.
Program13-04-02 abbreviated dial Name (with matching caller ID).
3.
Calling party number.
For trunks, new Program 15-05-40 controls what is displayed and has the following options
1.
Both Name and Number.
2.
Name only.
3.
Number only.
Wireless DECT (SIP)
Issue 8.01
2 - 1827