NEC Univerge SV8100 Features And Specifications Manual page 1866

Issue 8.01
Program
Program Name
Number
84-19-27 SIP Extension CODEC
Information Basic Setup – RX
Gain
84-19-28 SIP Extension CODEC
Information Basic Setup – Audio
Capability Priority
84-19-31 SIP Extension CODEC
Information Basic Setup – DTMF
Payload Number
84-19-32 SIP Extension IP CODEC
Information Basic Setup – DTMF
Relay Mode
84-19-33 SIP Extension IP CODEC
Information Basic Setup –
Number of G.722 Audio Frames
84-19-34 SIP Extension IP CODEC
Information Basic Setup – G.722
Voice Activity Detection Mode
84-19-35 SIP Extension IP CODEC
Information Basic Setup – G.722
Jitter Buffer (min)
84-19-36 SIP Extension IP CODEC
Information Basic Setup – G.722
Jitter Buffer (Average)
84-19-37 SIP Extension IP CODEC
Information Basic Setup – G.722
Jitter Buffer (Max)
2 - 1838
Description/Comments
Define RX Gain Values –
Adjusting this value increases or
decreases volume levels for the
sending party. Consult the
UNIVERGE SV8100 Programming
Manual for Transmit Gain scale to
set acceptable value.
Define Audio Capability Priority.
Define the DTMF Payload
Number.
Select the DTMF Relay Mode.
Define the number of Audio
Frames for G.722 CODEC.
Enable/Disable the G.722 Voice
Activity Detection Mode.
Define the minimum setting for the
G.722 Jitter Buffer.
Define the average setting for the
G.722 Jitter Buffer.
Define the maximum setting for
the G.722 Jitter Buffer.
UNIVERGE SV8100
Assigned Data
1
0~40 =
(-20dBm ~ +20dBm)
0 = -20 dBm
1 = -19 dBm
:
20 = 0 dBm
:
39 = +19 dBm
40 = +20 dBm
(default = 20)
0 = G.711_PT
1 = G.723_PT
2 = G.729_PT
3 = G.722
4 = G.726
5 = Not Used
(default = 0)
96~127
(default = 96)
0 = Disable
1 = RFC2833
(default = 0)
1~4
1 = 10ms
2 = 20ms
3 = 30ms
4 = 40ms
(default = 3)
0 = Disable
1 = Enable
(default = 0)
0~160ms
(default = 30)
0~160ms
(default = 60)
0~160ms
(default = 120)
Wireless DECT (SIP)
Level
2 3








