NEC Univerge SV8100 Features And Specifications Manual page 1871

UNIVERGE SV8100
Caller ID Display After a Call Transfer
Program
Program Name
Number
20-06-01 Class of Service for Extensions
20-11-06 Class of Service Options (Hold/
Transfer Service) – Unscreened
Transfer (Ring Inward Transfer)
Operation
Placing an outside call with pre-dial:
1. Dial 9.
2. Press and hold the
3. Dial the outside number.

4. Press the key (On-Hook/Off-Hook).
For more information on the Wireless DECT (SIP) feature, refer to the NEC SIP DECT Solutions
Manuals.
Off-hook Signaling
To answer off-hook signaling (2nd call) and answer hold recall of 1st call:
 Program 20-13-54 is set to Enable.
 Program 20-13-06 is set to Automatically
1. From ext 100 call IP DECT 200 (1st call).
2. Answer on IP DECT 200 and talk with ext 100.
3. From ext 101 Call IP DECT (2nd call).
4. IP DECT receives off-hook signal.
Wireless DECT (SIP)
Description/Comments
Assign a Class of Service (1~15)
to an extension.
Turn Off or On an extension user
ability to use Unscreened
Transfer.
key to insert a pause (–), if necessary.
#
Assigned Data
1
Day Night/Mode: 1~8
Class of Service of
Extensions (1~15)
Default:
Extension port 101 =
Class 15
All other extension port
= Class 1
0 = Off
1 = On
(default = 1 for
COS 1~15)
Issue 8.01
Level
2 3


2 - 1843