NEC Univerge SV8100 Features And Specifications Manual page 1819

UNIVERGE SV8100
5. After the system powers down, insert the USB memory containing the language prompt set into the
USB port on the CD-CP00-US.
6. Push in and hold the Load button.
7. Turn the system power On.
8. Continue holding the Load button for approximately 10 seconds or until Status LED5 begins
flashing red.
9. Release the Load button.
10. Wait until the Status LEDs on the CD-CP00-US have the following indications, approximately two
minutes:
LED 2: Flashing Red
LED 3: Flashing Red
LED 4: Flashing Red
LED 5: Steady Red
11. Turn the system power Off and remove the USB memory.
12. Turn the system power back On.
Default Setting
None
System Availability
Terminals
All Terminals
Required Component(s)
CD-CP00-US
Related Features
Account Code – Forced/Verified/Unverified
Automatic Call Distribution (ACD)
Voice Response System (VRS) Embedded VRS
Issue 8.01
2 - 1791