Subaru 2009 IMPREZA Service Manual page 3103

Hide thumbs Also See for 2009 IMPREZA:

7) Remove the backrest from the hinge assembly

LH (hinge assembly RH).

The armrests cannot be detached while pin posi-

tions of the hinge assembly and armrest are not

B: INSTALLATION

If the hooks on the vehicle body side disengage

(remained on the seat cushion side), when the

rear seat cushion is removed, always replace

with new hooks.

Install in the reverse order of removal.

Tightening torque:

Refer to "COMPONENT" of "General Descrip-

tion". <Ref. to SE-4, REAR SEAT, COMPO-

NENT, General Description.>

C: DISASSEMBLY

1) Remove the rear seat. <Ref. to SE-11, REMOV-

AL, Rear Seat.>

2) Remove the armrest hinge cover in the direction

of arrow (black), and loosen the screws to remove

the armrest.

The armrests cannot be detached while the back-

rest assembly RH and armrest side pin positions

are not aligned.

3) Remove the backrest knob. (Screw-in type)

(5 door model)