Front Inner Remote - Subaru 2009 IMPREZA Service Manual

Front Inner Remote

SECURITY AND LOCKS
5. Front Inner Remote
A: REMOVAL
1) Remove the door trim. <Ref. to EI-43, REMOV-
AL, Door Trim.>
2) Remove the cable from the cable holder.
3) Remove the screws, and remove the inner re-
mote handle.
SL-00734
B: INSTALLATION
Install in the reverse order of removal.
C: INSPECTION
1) Check the cable of the door opener and door
lock for deformation. When it is deformed, straight-
en it because failure operations may occur. When it
is unrepairable, replace the front door latch and
door lock actuator assembly.
2) Check the lever, rod and wire for smooth opera-
tion.
SL-32