Subaru 2009 IMPREZA Service Manual page 3104

Hide thumbs Also See for 2009 IMPREZA:

4) Remove the seat back latch cover.

5) Peel the backrest cover, and remove the hog

6) Remove all the hog rings which fix the backrest

frame and backrest pad.

7) Remove the headrest bushing.

8) Remove the backrest pad and backrest cover

from the backrest frame.

9) Disassemble the backrest assembly LH follow-

ing the procedures described above.

10) Remove all the hog rings of the seat cushion,

and separate the seat cushion cover and seat

cushion pad.

11) Open the plastic fastener, and then remove the

headrest cover from the headrest.

12) Remove the plastic fastener and hog rings, and

then remove the armrest cover.

• Always use new hog rings.

• Secure the hog ring using hog ring pliers.

• Install the hog rings to the specified points

securely and make sure that no wrinkle or twist-

ing on backrest cover.

Assemble in the reverse order of disassembly.

• Do not contaminate or damage the cover.

• While installing the hog rings, prevent the seat

from getting wrinkled.