NEC Univerge SV8100 Features And Specifications Manual page 124

Issue 7.0
Multiple Agent Log In
To log in:
Multiline Terminal
After already being logged in:
1. Press the ACD LOG IN/LOG OUT key (Program 15-07-01 or SC 752:
2. Dial 0 to cancel the log out option.
3. Dial the Agent Identity Code (AIC) (up to four digits).
The ACD LOG IN/LOG OUT key lights.

- OR -
Press Speaker and dial the AIC Log In service code (Program 11-13-08).
4. Dial the Agent Identity Code (AIC) (up to four digits).
The ACD Log In/Log Out key lights.

Single Line Telephone
 Follow Steps 1~3 to log in with additional AICs (up to three) anytime.
1. Lift the handset and dial the AIC Log In service code (Program 11-13-08).
2. Dial the log in code (up to 20 digits).
This step is not required if the ID code is disabled in Program 41-01-02.

3. Dial the first Agent Identity Code (AIC) (up to four digits).
You hear a confirmation tone when immediately logging in with additional AICs.

4. For second agent log: Dial the second Agent Identity Code (AIC) (up to four digits).
You hear a confirmation tone.

5. For third agent log: Dial the third Agent Identity Code (AIC) (up to four digits).
You hear a confirmation tone.

2 - 96
UNIVERGE SV8100
10).

Automatic Call Distribution (ACD)