Automatic Release - NEC Univerge SV8100 Features And Specifications Manual

Hide thumbs Also See for Univerge SV8100:

Table of Contents

UNIVERGE SV8100

Automatic Release drops the line circuit when an outside party abandons the call. For this feature to

work with Loop Start Trunks, the CO/PBX providing the outside line must provide a timed disconnect

signal. Automatic Release is normally provided on Ground Start, DID, ISDN, and Tie Line trunks.

Automatic Release on ISDN trunks is provided by the protocol.

When an outside line is accessed using a dedicated line key, the LED associated with the

line key goes off when Automatic Release occurs.

This feature functions while a call is in progress, on hold, or in a conference.

This feature applies to all ICM type calls in progress, holding or parked.

When Automatic Release occurs and the telephone is in handsfree mode, Speaker

automatically turns off. If using the handset, the station is set to idle when the handset goes

Default Settings

System Availability

Required Component(s)

Automatic Release