NEC Univerge SV8100 Features And Specifications Manual page 142

Hide thumbs Also See for Univerge SV8100:
Table of Contents

Advertisement

Issue 7.0
Program
Program Name
Number
14-07-01
Trunk Access Map Setup
15-06-01
Trunk Access Map for
Extensions
20-03-04
System Options for Single Line
Telephones – Dial Sending Start
Time for SLT or ARS
20-06-01
Class of Service for Extensions
2 - 114
Description/Comments
Set up the Trunk Access Maps.
This sets the access options for
trunks.
Assign Trunk Access Maps to
extensions.
When ARS or an analog extension
user accesses a trunk and dials an
outside call, the system waits this
time before outdialing the first
digit.
Assign a Class of Service (1~15)
to an extension.
UNIVERGE SV8100
Assigned Data
1
0 = No access
1 = Outgoing access
only
2 = Incoming access
only
3 = Access only when
trunk on Hold
4 = Outgoing access
and access when trunk
on Hold
5 = Incoming access
and access when trunk
on Hold
6 = Incoming and
Outgoing access
7 = Incoming access,
outgoing access and
access when trunk
on Hold
Trunk Access Maps:
1~200
Default:
Access Maps 1~200 =
Trunk Ports 1~200
assigned with option 7
access (incoming and
outgoing access and
access when trunk is
on Hold).
Trunk Access Maps:
1~200
(default = 1)
0~64800 (seconds)
(default = 3)
Day/Night Mode: 1~8
Class of Service for
Extensions: 1~15
Defaults:
Extension number 101
as Class 15.
All other extension
numbers are set as
Class 1.
Automatic Route Selection
Level
2
3

Advertisement

Table of Contents
loading

Table of Contents