NEC Univerge SV8100 Features And Specifications Manual page 206

Issue 7.0
Related Features
Do Not Disturb
Programmable Function Keys
Guide to Feature Programming
The Level 1, Level 2 and Level 3 columns indicate the programs that are assigned when programming
this feature in the order they are most commonly used. These levels are used with PCPro and WebPro
wizards for feature programming.
Level 1 – these are the most commonly assigned programs for this feature.

Level 2 – these are the next most commonly assigned programs for this feature.

Level 3 – these programs are not often assigned and require an expert level working knowledge of

the system to be properly assigned.
Program
Program Name
Number
11-11-07 Service Code Setup (for Setup/
Entry Operation) – Call
Forwarding – Follow Me
15-07-01 Programmable Function Keys
20-06-01 Class of Service for Extensions
20-11-05 Class of Service Options (Hold/
Transfer Service) – Call
Forwarding with Follow Me
2 - 178
Description/Comments
Assign the service code of Call
Forward Follow Me.
Assign functions to multiline
terminal line keys.
Assign a Class of Service (1~15)
to extensions.
Turn Off or On an extension user
ability to set Call Forward with
Follow Me.
UNIVERGE SV8100
Assigned Data
1
MLT, SLT
(default = 746)
Line Key 1~48
0~99 (Normal Function
Code 751 by default)
(15 = Call Forward with

Follow Me)
 
00 ~ 99
(Appearance Function
Code) (Service Code
752 by default)
Day Night/Mode: 1~8
Class of Service of
Extensions (1~15)
Default:

Extension port 101 =
Class 15
All other extension port
= Class 1
0 = Off
1 = On

(default = 1 for
COS 1~15)
Call Forwarding with Follow Me
Level
2 3
