NEC Univerge SV8100 Features And Specifications Manual page 51

UNIVERGE SV8100
3. Dial .

- OR -
Press your Account Code key (Program 15-07 or SC 751: code 50).
To enter an Account Code before dialing the outside number:
If your system has Forced or Verified Account Codes, you may use this procedure instead of letting the
system prompt you for your Account Code. You may also use this procedure if your system has Optional
Account Codes.
If your system has Verified Account Codes enabled, be sure to choose a code programmed into your
Verified Account Code list.
1. Access trunk for outside call.
Press a line key or dial a code (except 9) to access a trunk. Refer to

for more information.
2. Dial .

- OR -
Press your Account Code key (Program 15-07 or SC 751: code 50).
3. Dial your Account Code (1~16 digits, using 0~9 and
If you make an incorrect entry, your system may automatically alert the operator. If Account Codes are hidden,

each digit you dial shows
4. Dial .

- OR -
Press your Account Code key (Program 15-07 or SC 751: code 50).
5. Dial the number you want to call.
To enter an Account Code for an incoming call:
This procedure is not available for single line telephones.
1. Answer incoming call.
If Account Codes for Incoming Calls is disabled, the following steps dial digits out to the connected trunk.

2. Dial .

3. Enter the Account Code.
You can enter any code of the proper length. Incoming Account Codes cannot be Forced or Verified.

4. Dial .

Account Code Entry
on the telephone display.

Central Office Calls, Placing on page 2-261
).
#
Issue 7.0
2 - 23