NEC Univerge SV8100 Features And Specifications Manual page 44

Issue 7.0
Program
Program Name
Number
35-05-04 Account Code Setup – Hiding
Account Codes
35-06-01 Verified Account Code Table –
Verified Account Code
40-10-01 Voice Announcement Service
Option – VRS Fixed Message
Operation
To enter an Account Code anytime while on a trunk call:
The outside caller cannot hear the Account Code digits you enter. Use this procedure if your system has
Optional Account Codes enabled. You may also use this procedure for incoming calls. This procedure is
not available for single line telephones.
1. Dial .

- OR -
Press your Account Code key (Program 15-07-01 or SC 751: code 50).
2. Dial your Account Code (1~16 digits, using 0~9 and
If Account Codes are hidden, each digit you dial shows

3. Dial .

- OR -
Press your Account Code key (Program 15-07-01 or SC 751: code 50).
To enter a Forced Account Code before dialing the outside number:
If your system has Forced or Verified Account Codes, you may use this procedure instead of letting the
system prompt you for your Account Code. You may also use this procedure if your system has Optional
Account Codes.
2 - 16
Description/Comments
For each Class of Service (1~15),
enter 1 to have the system hide
Account Codes on an extension
display as they are entered. Enter
0 to have the Account Codes
displayed.
Enter data in the Verified Account
Code Table. You can enter up to
2000 codes from 3~16 digits in
length. For a wild card @, press
the LK 1.
Enable (1) or Disable (0) the
system ability to play the fixed
VRS messages (such as You have
a message).
).
#
on the telephone display.

Account Code – Forced/Verified/Unverified
UNIVERGE SV8100
Assigned Data
1
0 = Account Codes
Displayed
1 = Account Codes not
Displayed
(default = 0)
Up to 16 digits
#
Enter: 1~9, 0, , @

(@ = Wild Card)
(default not assigned)
0 = Not Used
1 = Used
(default = 0)
Level
2 3

