NEC Univerge SV8100 Features And Specifications Manual page 63

UNIVERGE SV8100
Guide to Feature Programming
The Level 1, Level 2 and Level 3 columns indicate the programs that are assigned when programming
this feature in the order they are most commonly used. These levels are used with PCPro and WebPro
wizards for feature programming.
Level 1 – these are the most commonly assigned programs for this feature.

Level 2 – these are the next most commonly assigned programs for this feature.

Level 3 – these programs are not often assigned and require an expert level working knowledge of

the system to be properly assigned.
Setting Up Alarms:
Program
Program Name
Number
90-10-01 System Alarm Setup – Alarm
Type
90-10-02 System Alarm Setup – Report
90-24-01 System Alarm Report
Notification Time Setup – Month
90-24-02 System Alarm Report
Notification Time Setup – Day
Alarm Reports
Description/Comments
Set the alarm type 14 and 60.
Alarm 14 – CD-CP00-US-LAN
Link Error (IP Layer 1)
Assign a Major or Minor alarm
status to the LAN link. This
program also assigns whether or
not the alarm is displayed to a key
telephone and whether or not the
alarm information is reported to
the predefined destination.
Alarm 60 – SIP Registration
Error Notification
Assign a Major or Minor alarm
status to the SIP Registration
Error. This program also assigns
whether or not the alarm is
displayed to a key telephone and
whether or not the alarm
information is reported to the
predefined destination.
Assign whether or not the alarm is
displayed to a multiline terminal
and whether or not the alarm
information is reported to the
predefined destination in Program
90-11.
Set the month for the alarm report
to print.
Set the day for the alarm report to
print.
Assigned Data
1
0 = Not Set
1 = Major Alarm
2 = Minor Alarm
(default = 0)
0 = No Report (no
autodial)
1 = Report (autodial)
(default = 0)
Month 00~12
(0 = Disabled)
(default = 00)
Day 00~31
(0 = Disabled)
(default = 00)
Issue 7.0
Level
2 3




2 - 35