NEC Univerge SV8100 Features And Specifications Manual page 310

Issue 7.0
Program
Program Name
Number
20-11-22 Class of Service Options (Hold/
Transfer Service) – Restricted
Unsupervised Conference
20-11-23 Class of Service Options (Hold/
Transfer Service) – CAR/VE Call
Forward Set/Cancel
20-11-24 Class of Service Options (Hold/
Transfer Service) – Trunk Park
Hold Mode
20-11-25 Class of Service Options (Hold/
Transfer Service) – Transfer Park
Call
20-11-27 Class of Service Options (Hold/
Transfer Service) – Call Park
Automatically Search
20-12-02 Class of Service Options
(Charging Cost Service) –
Advice of Charge
20-12-03 Class of Service Options
(Charging Cost Service) – Cost
Display (TTU)
20-13-01 Class of Service Options
(Supplementary Service) – Long
Conversation Alarm
20-13-02 Class of Service Options
(Supplementary Service) – Long
Conversation Cutoff (Incoming)
20-13-03 Class of Service Options
(Supplementary Service) – Long
Conversation Cutoff (Outgoing)
2 - 282
Description/Comments
Allow/Deny an extension user to
initiate a Trunk-to-Trunk Transfer
(Tandem Trunking).
Turn Off or On an extension user
ability to set and cancel Call
Forwarding for a CAR or Virtual
Extension.
Set the hold type when a trunk call
is put on hold by an extension.
Turn On or Off an extension user
ability to transfer a parked call.
Turn Off or On using the Call Park
Automatically Search option.
ISDN-AOC
Turn Off or On a DISA or tie trunk
caller ability to dial 9 for Trunk
Group Routing or Automatic Route
Selection.
ISDN billing information.
Turn Off or On the Warning Tone
for Long Conversation (not for
single line telephones).
Turn Off or On an extension user
ability to use Long Conversation
Cutoff for incoming calls.
Turn Off or On an extension user
ability to use Long Conversation
Cutoff for outgoing calls.
UNIVERGE SV8100
Assigned Data
1
0 = Allow
1 = Deny
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 1 for
COS 1~15)
0 = Non Exclusive Hold
(Off)
1 = Exclusive Hold
(On)
(default = 1 for
COS 1~15)
0 = Off
1 = On
(default = 1 for
COS 1~15)
0 = Off
1 = On
(default = 1 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 1 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
Class of Service
Level
2 3









