NEC Univerge SV8100 Features And Specifications Manual page 255

Hide thumbs Also See for Univerge SV8100:

Table of Contents

UNIVERGE SV8100

Display Reason for No Caller ID Information

With Caller ID enabled, the system provides information for analog calls that do not detect the Caller ID

information. If the Caller ID information is restricted, the telephone display shows PRIVATE. If the

system cannot provide Caller ID information because Telco information is not detected, the display

shows NO CALLER INFO.

Calling Party Number Information

When using the Wireless DECT (SIP) telephone, the system can provide the Caller ID information for an

external call if it is provided by the Telco.

Option to Enable Caller ID Name for SLT

System programming provides an option for single line telephones to display Caller ID.

Add Trunk Access Code to Caller ID with Wireless DECT (SIP) – Phones

UNIVERGE SV8100 SIP DECT Phones on the UNIVERGE SV8100 can hold incoming call history. This

history is created based on the Caller ID information element contained in the call Setup message which

is transmitted from the UNIVERGE SV8100. This information allows users to return calls dialing the

number stored.

The stored number, however, does not contain the trunk access code. Without this code, the system

may not be able to seize an outside line to complete the call.

With this feature, when an Wireless DECT (SIP) user receives an incoming trunk call, the trunk access

code defined in programming can be added to the Caller ID. This allows the system to seize an outside

line and then dial the stored number.

This function is applied only to incoming ISDN calls. It does not apply to incoming extension calls.

Caller ID must be available for this feature to work.

The maximum number of Caller ID digits is 20. If the total number of digits [trunk access code

(Program 10-02-05) and Caller ID] is over 20, the remaining Caller ID digits are not dialed.

For example:

Trunk Access Code (Program 10-02-05): 123456

Incoming Caller ID: 12345678901234567890 (20 digits)

UNIVERGE SV8100 Wireless Dials: 123456

An additional digit (such as 1) may be required to complete the call (Program 10-02-04).

For example:

Incoming Caller ID shows: 2125551212.

If your area code is NOT 212, define a 1 in Program 10-02-04. When callback is executed, the

system prefixes 1 on the digits dialed string.

(eight digits)

123456789012