System Configuration - Digital Equipment VAXstation I Service Manual

PREFACE
PREFACE
INTRODUCTION TO THE GUIDE
This guide contains system configuration and maintenance
information and procedures. All the information in this guide
has been abstracted from the VAXstation I · Technical Manual,
EK·VS200-TM. For more detailed descriptions and explanations,
refer to that manual.
CHAPTER:
1 SYSTEM CONFIGURATION .. Brifely describes switches, jumpers,
and backplane configuration. For more information see
Chapter 2 in the VAXstation r Technical Manual, EK·VS200-TM.
2 PROGRAMMING INFORMATION ·- This chapter describes the 32
I/0
page locations that are used for the exchange of control and
status information between the CPU nad the VCBOl. For more
information see Chapter 4 in the VAXstation I Technical
Manual, EK-VS200-TM.
3
4
MAINTENANCE -- Describes
information see Chapter
Manual, EK·VS200-TM.
diagnostic
5 in the
procedures. For more
VAXstation I Technical
REPLACEMENT ·· Gives
replacing system
identical to Chapter
EK-VS200·TM.
step-by-step procedures for removing and
components. This chapter is nearly
6 in the VAXstation I Technical Manual,
ix