The Set Or Setenv Command - Digital Equipment DEC 3000 500X AXP Owner's Manual

The help advanced Command
When you issue the
Command
Example displays a list of topics similar to the following:

The set or setenv Command

Description The
variable.
Issue the
Command
Syntax
>>> setenv environment_variable
The environment_variable parameter can be any of the
environment variables listed in Table 9–1. Setting the password
environment variable is described in Chapter 10.
Command See Chapter 9 to see how to use the
Example environment variables.
8–14 Using Console Commands
help advanced
BOOT [- FL <bflg> ] [-FI <filnam> ] <devlist>
CONTINUE
DEPOSIT [{-B | -W | -L | -Q | -A }][{-PM | -VM }][-G][-U][-N:<n>]
[{<addr> | <sym>| + | - | * | @ } [<datum>]]
EXAMINE [{-B | -W | -L | -Q | -A }][{ -PM | -VM }][-G][-U][-N:<n>]
[{<addr> | <sym>| + | - | * | @ }]
HALT
HELP [MIPS_EMULATOR | SET | SHOW]
INITIALIZE
LOGIN
REPEAT <cmd>
SET[ENV] <envar> <value>
SHOW | PRINTENV <envar>
START <addr>
TEST <devnam> [<tstnam>]
set or setenv command lets you set an environment
or command as follows:
set setenv
command, your system
Return
command to change
set