Bsis Rs-232 Serial Port Setup - Toshiba Strata CTX Programming Manual

System
I/O Device
F
IELD
05~08 Client IP
Address
09 Client Port Number
10 Read Retry Number
11 Write Retry Number

804 BSIS RS-232 Serial Port Setup

Prerequisite Program:
Use this screen to setup the RS-232
serial ports on the BSIS PCB.
1. From the Program Menu click
System > I/O Device. The
Equipment Assignment screen
displays.
2. Click the RS232 Serial Port tab. 804
BSIS RS232 Serial Port Set Up
screen displays (shown right).
3. Enter Program 804 data.
4. Click Submit.
F
IELD
00 BSIS Port (1~4)
01 Port Speed
02 Port Parity
03 Data Bits
04 Flow Control
05 Wait Timer
4-30
D
ESCRIPTION
Enter the Client LAN IP Address. This field is required if Client was selected in 02 PC
Operation Type above.
Possible values: 0~255 for each octet (default = 0)
Note Enter IP address of Stratagy iES32 or SES.
Enter the Client Port number. This field is required if Client was selected in 02 PC
Operation Type above.
Possible values: 0~65535 (default = 0)
Select the Read Retry counter.
Possible values: 0~10 (default = 1)
Select the Write Retry counter.
Possible values: 0~10 (default = 1)
None
D
ESCRIPTION
Enter the BSIS PCB port number.
Possible values: 1~4 (default = no value)
Select the data speed for the BSIS port in bits per second (bps).
Possible values: 300, 1200, 2400, 4800, 9600 (default), 19200, 38400 or 57600
Note The total combined maximum speed of BSIS ports cannot exceed 57,600 bps.
Select the parity error checking method used by the BSIS port.
Possible values: None, Even or Odd (default)
Select Data Length.
Possible values: 7 Bits (default) or 8 Bits
This setting indicates the type of flow control used between the BSIS port and the SMDI or
SMDR device. To enable Strata CTX to buffer call records, set this field to Flow.
Possible values: None (default) or Flow
Select the maximum time to wait for connection. The Timer value can be one through 255
seconds. Select 0 to set to permanent waiting.
Possible values: 0~255 (default = 30)
Strata CTX Programming - Part 2: CTX WinAdmin Programming 04/03