Station Pdn Selective Copy - Toshiba Strata CTX Programming Manual

Station
Assignment

Station PDN Selective Copy

This screen provides you the option of selecting either all or some of the parameters to be copied to the
destination PDNs.
Using this screen you can do any of the following functions:
• Copy to multiple destination PDNs.
• Check All to highlight all the
parameters to be copied.
...or select individual/multiple
parameter(s) to be copied.
1. Select Station > Assignments. Enter the
Primary DN.
2. Click Submit > Copy. The Selective
Copy screen displays (shown right).
3. Check Highlight All to highlight all the
parameters to be copied.
...or select individual/multiple
parameter(s) to be copied.
Note If you want to copy almost all items
and leave out a few, you can check Highlight All and then click on the items that you don't want to
copy to deselect them.
4. Click Copy Now to start the copying process.
5. When copy is complete, a dialog box displays that reads "End of Copy!"
You can return to the previous page and/or reselect copy to different destination PDNs by clicking
Note
Back.
5-6
Strata CTX Programming - Part 2: CTX WinAdmin Programming 04/03