Creating New Feature Codes; Flexible Numbering Default Settings - Toshiba Strata CTX Programming Manual

System
102 Flexible Access Codes

Creating New Feature Codes

1. Click on the Create button.
2. Enter new feature/access code. Click Ok. WinAdmin will start a refresh cycle, when your complete
screen will change to a gray (edit mode) color and the feature/access code will be red.
3. From the Feature Name drop down menu select the feature to be assigned.
4. Submit your data.
Notes
• To range program feature/access codes use a "*" between a range of values and a "," for an additional
entry not in a range.
• System Date and Time Access Codes – These functions require CTX R1.02, MA227 or higher
software. The system date adjust code and system time adjust code is different for every system. The
defaults are #651 and #652 respectively.
Important!

Flexible Numbering Default Settings

Table 4-1 shows the default Flexible Numbering Feature and Flexible Numbering Plan code relationships.
Pressing the Flexible Numbering Plan code from any station enables users to directly access the Flexible
Numbering Feature. The Feature Index Codes will display on the LCD of the telephone once the Default
Access Codes are entered.
4-4
If you backup a CTX database (default.dat) with a CTX software that does not support Time/
Date access codes and then restore it to a CTX software that supports these access codes,
you must use this program to set the Time/Date access codes. This must be done to allow end
users to set the Time/Date from their LCD digital telephones.
Strata CTX Programming - Part 2: CTX WinAdmin Programming 04/03