Series Programs - Toshiba Strata CTX Programming Manual

600 Series Programs

Programs 650~660
Button Sequence
650 Behind Centrex
Assignment
,
%$ C‚yq
650-00 OLG Number
n,
C‚yq
650-01 Behind Centrex
)% +ROG
, n,
650-02 Assume 9
)% +ROG
, n,
650-03 Pause Timer
(Seconds)
)% +ROG
, n,
651 Private Routing Plan
Analysis Table
Assignment
,
%$ C‚yq
651-00 Node ID
n, .
C‚yq
651-01 Private Network
Route Choice Table
Number
, n, ,
A7 C‚yq C‚yq
653 Private Route Choice
Table Assignment
,
%$" C‚yq
653-00 Private Network
Route Choice Table
Number.
n, ,
C‚yq
653-
 ÃS‚ˆ‡rÃ9rsvv‡v‚Ã
Uhiyr—%ÃS‚ˆ‡rÃ
01~06
9rsvv‡v‚ÃUhiyr
~ , n,
A7 A7% C‚yq
C‚yq
654 Private Route
Definition Table
Assignment
,
%$# C‚yq
654-00 Private Network
Route Definition
n,
C‚yq
654-01 OLG
, n,
A7 C‚yq
Strata CTX Programming - Part 3:Telephone Button Programming 04/03
Value(s)
n = 1~32 (CTX100)
1~50 (CTX670 Basic)
1~128 (CTX670 Exp.)
n = 1:Enable
2:Disable (default)
n = 1:Enable
2:Disable (default)
n = 0~5
(default = 0)
n = Up to 6-digits.
n = 0~64, 0 = Delete
n = 1~64, 0 = delete
n = 0~64, 0 = delete
,
n = 1~64
n = 1~32 (CTX100)
1~50 (CTX670 Basic)
1~128 (CTX670 Exp.)
0 = delete
Telephone Button Programming
Summary
Assigns parameters for operation behind Centrex or another PBX
Specify OLG Number that is attached to a Centrex or another PBX.
(1~128 Expanded; 1~47 Basic)
Enable or disable Behind Centrex operation for this OLG.
Check to turn on the Assume 9 feature.
Enter the number of seconds (0~5) the CTX will wait for second dial
tone from Centrex/PBX.
Assigns Node IDs to Route Choice Tables for Private Networking
Enter the Node ID to be associated with a Private Route Choice Table
Number.
Note Enter the Private Route Choice Table Number to be
associated with this Node ID. Entering "0" deletes the Node
ID.
Use this command to define a Private Network Route Choice Table. A
Private Network Route Choice Table contains up to six Route
Definitions. The system will step through these Route Definitions in
terminating hunt fashion to find a route to the desired Private Network
networking node. There may be up to 64 Route Choice Tables.
Enter the Private Network Route Choice Table Number (1~64).
Enter the first, second, third, fourth, fifth, last Route Definition Table to
be used for for this Private Network Route Choice. Entering "0" will
delete an existing entry.
Use this command to define a Private Network Route Definition. A
Private Network Route Definition consists of an Outgoing Line Group
(OLG) and a pointer into the Private Network Digit Modification Table
that contains the dialed digits to be deleted and/or inserted before
being communicated to the distant node.
Enter the number of the Private Network Route Definition (1~64) to be
defined or deleted.
Enter the OLG to be used by this route definition.(1~128 Expanded;
1~47 Basic)
600 Series Programs
13-89