Trunk Assignment - Toshiba Strata CTX Programming Manual

Trunks

300 Trunk Assignment

300 Trunk Assignment
Prerequisite Program:
Assigns an analog or T1 trunk (line) and its parameters to the system. Click on each tab to navigate through
the programs. The trunks assigned to the equipment display on the left of the screen. The first column
displays the trunks used and the second column displays the equipment. You can also sort based on trunks
and equipment.
Important!
1. Complete the
Record Sheet"
2. From the Program Menu, click
Trunk > Assignment. The Trunk
Basic Assignments screen displays
(shown right).
3. Enter a Trunk Number
...or click one of the following
buttons:
• List – view a summary list of
programmed Trunks.
• Create – Assign a new Trunk
with default settings.
• Copy – Enter an Trunk Number and click Copy to make a new Trunk assignment with settings
copied from the OLG entered in Group Number.
• Delete – Delete an Trunk.
4. Enter Trunk Assignment Data.
5. Click Submit.
6. Click the Go Timer/DIT link to view Programs 308 and 310 (see
details).
F
IELD
Line Number
6-6
100 on page 4-1
You must have Internet Explorer (IE) 6.0 on your PC for the sort to work correctly. If you
have IE 5.0, you can upgrade to IE 6.0 using the Strata CTX CD-ROM. IE 6.0 does not auto-
install from the CD-ROM; run ie6setup.exe from the IE 6.0 folder on the CD-ROM.
"Trunk Assignment
on page D-23.
D
ESCRIPTION
Enter the Line Number.
Possible values: 1~64 (CTX100), 1~96 (CTX670 Basic),
"308 Trunk Timer"
1~264 (CTX670 Exp.), (default = no value)
Strata CTX Programming - Part 2: CTX WinAdmin Programming 04/03
on page 6-9 for