Mac Address (System Serial Number); Data Backup - Toshiba Strata CIX Programming Manual

Telephone Button Programming
900 Series Programs

MAC Address (System Serial Number)

This program enables you to display your CTX 670 System Serial Number.
Program Number(s): 909
Prerequisite Program:
Reference:
Access Sequence:
FB Name
MAC Address
FB01
1. Press
Hold
2. Press
3. Enter another program number to continue programming or press
mode.

Data Backup

This program enables you to Back up system data to a SmartMedia card.
Program Number(s): 910
Prerequisite Program:
Reference:
Access Sequence:
FB Name
Backup Function
Numbers
Current Number
1-106
None
None
Login to programming mode from your telephone button pad:
Hold ✱#✱#1✱2✱3✱ .
At the PASSWORD= prompt, Enter your password and press Hold .
At the PROG= prompt enter 909 and press Hold .
FB
01 Display System Serial Number.
to view parameter. The MAC Address is view only and cannot be changed.
PROG
(twice) to exit to the
"Format/Unmount SmartMedia"
None
Login to programming mode from your telephone button pad:
Hold ✱#✱#1✱2✱3✱ .
At the PASSWORD= prompt, Enter your password and press Hold .
At the PROG= prompt enter 910 and press Hold .
FB
01 Start and Stop system backup.
Note Restore function is not operational
and should never be executed.
Use System Initialize
900) Level 1 to restore system
backup.
02 The number of data blocks. This number
varies depending on the amount of
programming the system contains.
03 This number increments as the backup
progresses. When the backup is complete
this number should match the total number
of data blocks displayed in Numbers
(FB02).
Summary
= prompt.
on page 1-105
Summary
(Program
Strata CIX/CTX Telephone Button Programming 11/04
Value LCD Prompt
12 digits MAC Address
# # Hold
again to exit programming
Value LCD Prompt
1:Backup 1:BACKUP
2:Restore (Do not 2:RESTORE
use. See Note on
3:CANCEL
left).
3:Cancel
Variable ALL NO=
Variable CUR NO=