Trunk Timer - Toshiba Strata CTX Programming Manual

F
IELD
Trunk Number
01 Signaling Method
02 Signaling Contents
03 CLASS Equipment No.

308 Trunk Timer

Prerequisite Program:
These commands assign Trunk timers.
1. Complete the
Record Sheet"
2. From the Program Menu, click
Trunk > Assignment, then click the
Timer tab. The Trunk Timer and
DIT Assignments screen displays
(shown right).
3. Enter Trunk equipment number
field. Enter Program 308 data.
• List – to view a summary list of
programmed Trunks timers.
• Copy – to copy to trunk timer
ports.
4. Click Submit.
Strata CTX Programming - Part 2: CTX WinAdmin Programming 04/03
D
ESCRIPTION
Enter the Trunk Number.
Possible values: 1~64 (CTX100), 1~96 (CTX670 Basic),
Specify the format for the interface being used.
Possible values: Nothing (default), ANI/DNIS-MCI, ANI/DNIS-Sprint or
Specify the contents of the ANI/DNIS format.
Possible values: ANI and DNIS, ANI only, DNIS only or DID only (default = no
If the CLASS type is chosen, the trunk must be assigned to a Caller ID circuit.
Enter the RCIU/RCIS equipment number as xxyyzz.
Possible values: xx = Cabinet 01(CTX100); 01~02 (CTX670 Basic); 01~07
Notes
•
CLASS equipment numbers are required when assigning a trunk to a
RCIU/RCIS circuit.
•
It can also be used to display the equipment location of existing caller ID
circuit to trunk assignments. Example: If the trunk should be connected to a
caller ID circuit (RCIU/RCIS) in cabinet shelf 5, slot 2, circuit 3, enter
050203.
300 on page 6-6
"Trunk Timer/DIT
on page D-27.
1~264 (CTX670 Exp.), (default = no value)
CLASS (Caller ID)
value).
(CTX670 Exp.)
yy = Slot 01~08 (CTX100); 01~10 (CTX670)
zz = Circuit 01~08
Trunks
300 Trunk Assignment
6-9