System Data - Toshiba Strata CTX Programming Manual

System

105 System Data

105 System Data
Prerequisite Program:
This command assigns system settings for your Strata CTX.
1. From the Program Menu click
System > System Data. The
System Data Assignment screen
displays (shown right).
2. Enter System Parameter data
using the table below.
3. Click Submit.
F
IELD
01 Executive Override
02 Station MOH
03 Ring Transfer Tone
04 Transfer Privacy
05 Privacy Override
06 Credit Card Code
07 Credit Card Digits
4-12
None
D
ESCRIPTION
Enable break in warning tone for Executive Override.
Possible values: Enable (default) or Disable
Select MOH for private lines and stations.
Possible values: Quiet Tone, External 1 (default), External 2, External 3,
External 4, External 5, External 6, External 7, External 8,
External 9, External 10, External 11, External 12, External
13, External 14 or External 15
Select tones for the transferred party to hear after a ringing transfer takes
place.
Possible values: RBT (default) or MOH
Transfer Privacy enabled: CO line buttons that have multiple appearances will
only flash and ring on the transferred-to telephone; the same CO line button on
other telephones will be red-busy.
Transfer Privacy Disabled: CO line buttons that have multiple appearances will
flash and ring on all telephones that have the CO line button appearance.
Possible values: Enable (default) or Disable
Enable Privacy Override Attendant Monitor warning.
Possible values: Enable or Disable (default)
Enter Service Indentifier for Credit Card Calling. If no value is entered in this
field any previously programmed data is lost.
Possible values: Up to 32 digits (default = no value)
Enter the Minimum Dial Digits for Credit Card Calling.
Possible values: 1~66 (default = 21)
Strata CTX Programming - Part 2: CTX WinAdmin Programming 04/03