Mcpn Owner Privileges; Member Requirements; Call Forward Activation - Toshiba Strata CTX Programming Manual

• If some MC Group destinations are busy, incoming call rings only idle destinations. However, if the
camp-on feature is in effect, incoming calls will camp-on to busy destinations.
• Members can be assigned to multiple MC Groups.

MCPN Owner Privileges

When you assign members to a multiple calling group, the member assigned to Index 1 in Program 518 is
considered an owner of the group. The owner of the group is the only member entitled to the following
privileges:
• The owner is the only member in the group that can receive Automatic Call Back calls and Message
Waiting Indications.
• The ringing option for the owner is always set to Immediate ring.
• The owner can be a PhDN or PDN.

Member Requirements

The table below has details for members that can and cannot be in a group.
Members that can be in a Group
PDNs
PhDNs
Station Hunt Group Pilot DNs
Immediate Destinations can only be PDNs (Digital and/or Standard Telephones) and
Important!
PhDNs.
Delay Destinations can be PDNs of Standard telephone circuits only and Voice Mail Hunt
Group Pilot Numbers (not Multiple DN Hunt Groups).

Call Forward Activation

System and Station Call Forward can be set up for each MC Group. The Call Forward Remote Access
Code is used to activate or de-activate Station Call Forward of MC Group. System Call Forward is
activated/deactivated using CTX WinAdmin. The MC Group can also be set as the destination of System
on Station Call Forward.
Strata CTX Programming - Part 2: CTX WinAdmin Programming 04/03
Members that cannot be in a Group
Pilot DNs - ACD, MCP
CO Line Access Codes
Services
Multiple Call Group
9-55