Toshiba Strata CTX Programming Manual page 97

F
IELD
39 CO Park & Hold
40 MW/DND
41 Activate Message
Waiting
Strata CTX Programming - Part 2: CTX WinAdmin Programming 04/03
D
ESCRIPTION
You can enable or disable CO Park and Hold.
Note This feature is available for CTX Software version R1.03 or higher.
Enabled: When this station parks a line call, CO or GCO buttons of the parked line
that appear on other stations will be on hold. This will allow the other stations to
press the CO or GCO button to pickup the parked call.
Disabled: When this station parks a line call, CO or GCO buttons of the parked line
that appear on other stations will appear busy. This will prevent the other stations to
press the CO or GCO button to pickup the parked call.
Possible values: Enable or Disable (default)
This feature is available only with CTX Release 1.3 or higher software and with CTX
WinAdmin Release 1.3 or higher software.
Enable: This station will receive stuttered dial tone when it has a station-to-station
or Voice Mail message waiting, or if it has set DND. This feature is available with
Strata CTX R1.3 software.
Disable: This station will receive normal dial tone when it has a station-to-station or
Voice Mail message waiting, or if it has set DND.
This feature is available only with CTX Release 1.3 or higher software and with CTX
WinAdmin Release 1.3 or higher software.
Enable: This station is allowed to activate station-to-station message waiting on
other stations by dialing the other station number plus 7, 8 or 9; or, by pressing the
Msg key. This feature is available with Strata CTX R1.3 software.
Disable: This station cannot activate station-to-station message waiting on other
stations by dialing the station number plus 7, 8 or 9.
Notes
• When disabled, digital telephones are still allowed to activate station-to-station
message waiting by pressing the Msg button.
•
This parameter does not apply to Voice Mail ports to use the special Message
Waiting access codes.
Station
Assignment
5-5