Programs 103~107
(continued)
Button
Sequence
105-07
Credit Card Digits
, n,
,
A7&
Cyq
Cyq
105-08
E911 Service
, n,
,
A7'
Cyq
Cyq
105-09
DR Override by SSD
, n,
,
A7(
Cyq
Cyq
105-10
Auto Station Release
, n,
,
A7
Cyq
Cyq
105-11
ISDN SPID
, n,
,
A7
Cyq
Cyq
105-12
Night Mode Relay
, n,
,
A7 !
Cyq
Cyq
105-13
BGM External Paging
, n,
,
A7 "
Cyq
Cyq
105-14
Lost Call Destination
, n,
,
A7 #
Cyq
Cyq
105-15
COS Override Code
, n,
,
A7 $
Cyq
Cyq
105-16
Multi-Conference
, n,
,
A7 %
Cyq
Cyq
105-17
Caller Number
Display
, n,
,
A7 &
Cyq
Cyq
Strata CTX Programming - Part 3:Telephone Button Programming 04/03
Value(s)
n =
1~66 digits
n =
1. Enable (default)
2. Disable
n =
1. Enable (default)
2. Disable
n =
1. Enable (default)
2. Disable
n =
1. Operable
2. Not Operable (default)
n =
0~8
n =
0~4 (CTX100)
0~8 (CTX670 Basic)
0~16 (CTX100 Expanded)
n =
Up to 5 digits
n =
1~8
(default = 1)
n =
1. Enable
2. Disable (default)
n =
1. Enable (default)
2. Disable
Telephone Button Programming
Summary
Minimum Dial Digits required for Credit Card Calling. This should be
the quantity of digits in a credit card number. If this quantity of digits is
not dialed when making credit card calls, the caller will be
disconnected. This is to insure that the call is charged to a credit card.
DRL tables in Program 111 and OLGs in Program 306 must be
enabled with credit card calling for this feature to be active. Users
must be assigned to a DRL table enable with credit card calling and
call out on a credit card calling enabled OLG for this featured to be
applied to the call.
Offer of E911 Service.
Destination Restriction Override by System Speed Dial.
Automatic Station Release.
Operation when Auto SPID or User Entry Of SPID fails.
Assign BIOU Relay (1~8) as the Night Relay - this relay activates
when the
system is in the Night Mode.
BIUO1 provides relays 1 to 4.
BIUO2 provides relays 5 to 8
Note
The CTX100 ACTU built-in relay is programmed as relay 5.
For this relay operation, a virtual BIOU2 is installed, as
default, in a virtual equipment position - Cabinet 2 slot 5.
(Cab. 02 slot 05, PCB code 20, in program 100). To install an
actual BIOU2 and disable the ACTU built-in relay, use the
programming telephone. To remove the virtual BIOU2 and
then install the actual BIOU2 in Cab. 01/slot 01~08 in the
normal manner.
Set the External Page Group Number that includes the external
paging zones to which BGM will be sent. See PRG503.
Set Lost Call Destination.
Class of Service Override Code Digits.
Conference connection of many member for Analog Internal Call and
Outgoing Call.
Caller number display preferentially.
100 Series Programs
13-19