Toshiba Strata CTX Programming Manual page 425

Program Code
33
54
320
80
321 80
33
80
80
322
80
80
96
18
33
33
49
49
49
49
323
49
49
49
49
49
49
Strata CTX Programming - Part 4: Appendices 04/03
Occurred Sub-
FB parameter
The entered equipment value is invalid.
A7
The quantity of lines, ISDN channels and PDNs entered
A7 —A7"
exceeds the number of ports licensed with this processor.
The circuit for the designated PCB must be an assigned ISDN
A7
primary trunk.
The entered OLG number does not exist in the system.
A7
The Group CO or Pool Line Group Destination is out of range

(1~128).
The entered OLG number does not exist in the system.
A7
The designated extension number does not exist in the
A7
system.
A7!
The entered GCO value does not exist in the system.
A7
A7!
The entered POOL value does not exist in the system.
A7
A7!
The allowable system DID assignments has been exceeded.
A7"
Select the Type of Service for CBC.
A7!
The Incoming Line Group entered is invalid.
A7%
The Outgoing Line Group entered is invalid.
A7&
The same value is designated to the Type of Service, Facility
Code, Service Parameters, and Network ID fields that
A7!—A7$
correspond to the same channel group and different line
service index.
The entered values in Channel Group and Index fields are not
valid CBC assignments. Select NODATA in Type of Service
A7!
field to delete CBC setting.
When an INWATS ILG is assigned in ILG field an Out WATS
A7!
Type of Service cannot be assigned.
A7%
If OUTWATS service is selected for Type of Service, an OLG
A7!
value must be assigned.
A7%
The selected ILG conflicts with an existing ILG number.
A7!
A7%
When an Out WATS OLG is assigned in OLG field an INWATS
A7!
Type of Service cannot be assigned.
A7&
Make a selection in OLG field.
A7!
A7&
The selected OLG conflicts with an existing ILG number.
A7!
A7&
The assigned minimum Bch value (Minimum Calls Zones
1~3) exceeds the related (Maximum Calls Zones 1~3)
A7'—A7 "
maximum Bch value.
The assigned minimum Bch value (Minimum Calls Zones
A7'
1~3) exceeds the related (Maximum Calls Zones 1~3)
A7 
maximum Bch value.
A7 !
Trunk Programming Error Codes
Error Descriptions
System Error Codes
B-15