Incoming Line Group Assignment - Toshiba Strata CTX Programming Manual

Trunks
304 Incoming Line Group

304 Incoming Line Group Assignment

Prerequisite Program:
This assignment is used to configure ILGs only, OLGs are configured in the Outgoing Line Group
Assignment 306. The same line can be placed in an ILG and OLG.
F
IELD
00 Group Number
01 Group Type
02 Trunk Type
03 Service Type
04 Private Service Type
05 GCO Key Number
06 Pooled Key Number
07 COS
08 DRL
09 FRL
10 QPL
11 DID Digits
12 Speech/3.1 KHz
6-2
None
D
ESCRIPTION
Enter the group number of the line group that should be configured.
Possible values: 1~32 (CTX100), 1~50 (CTX670 Basic), 1~128 (CTX670
Exp),
(default = no value)
Select the ILG Type.
Possible values: Analog (default) or ISDN
Select the Trunk Type.
Possible values: CO (default) or Tie
Select CO Trunk Service Type.
Possible values: DID or DIT (default)
Select the Tie Trunk Service Type. This field is required when Trunk Type is set
to Tie.
Possible values: Standard (default) or QSIG
Select ILG GCO Key Group for DIT mode (see Trunk Type above). The same
GCO cannot belong to different ILGs.
Possible values: 0~32 (CTX100), 0~50 (CTX670 Basic), 0~128 (CTX670
Exp),
(default = 0)
Select ILG Pooled Line Key Group for DIT mode. The same Pooled Line Group
cannot belong to different ILGs.
Possible values: 0~32 (CTX100), 0~50 (CTX670 Basic), 0~128 (CTX670
Exp),
(default = 0)
Select Day 1, Day 2 and Night Values.
Possible values: 1~32 (default = 1)
Select Day 1, Day 2 and Night Values.
Possible values: 1~16 (default = 1)
Select Day 1, Day 2 and Night Values.
Possible values: 1~16 (default = 1)
Select Day 1, Day 2 and Night Values.
Possible values: 1~16 (default = 1)
Select number of DID digits received from CO.
Possible values: 0~7 (default = 0)
Select Bearer Capability 3.1 KHz Audio or Speech.
Possible values: Audio (default) or Speech
Strata CTX Programming - Part 2: CTX WinAdmin Programming 04/03