Pad Table; Pad Table Assignment - Toshiba Strata CTX Programming Manual

PAD Table

Programs Used: 107, 108 and 114
Assign PAD groups, PAD Tables and PAD Conference Tables using these programs.
1. From the Program Menu click System >
PAD Table. The PAD Table Assignment
screen displays (shown right).
2. Enter Program 107 data.
3. Enter Program 108 data.
4. Enter Program 114 data.
5. Click Submit.
Note Clicking *Note displays
Program 107 and
108.

107 PAD Table Assignment

Prerequisite Program:
Assigns additional Sender and Receiver PAD values to PAD groups in the PAD table.
F
IELD
01 Sender PAD Device
Number
02 Receiver PAD Device
Number
03 PAD Loss
Strata CTX Programming - Part 2: CTX WinAdmin Programming 04/03
Table 4-9 for
Table 4-10 for Program
None
D
ESCRIPTION
Enter Sender PAD Device Number from PAD Table.
Possible values: Up to 3 digits. 101~132 (CTX670 Expanded),
101~110 (CTX670)
101~106 (CTX100),(default = no value), see
Enter Receiver PAD Device Number from PAD Table.
Possible values: Up to 3 digits. 101~132 (CTX670 Expanded),
101~110 (CTX670)
101~106 (CTX100)
(default = no value), see
Enter PAD Value (See Table 4-9
value shown shows the net effect.
Note To pad is to insert loss; therefore, "negative loss" equals net gain.
Possible values: 1 = 6 dB Net Gain, 2 = 3dB Net Gain, 3 = 0dB, 4 = 3dB Net
Loss, 5 = 6dB Net Loss, 6 = 9dB Net Loss, 7 = 12dB Net Loss
or 8 = 15dB Net Loss (default = no value).
Table 4-9 below.
below, or click on the drop down menu). The
System
PAD Table
Table 4-9 below.
4-21