Toshiba Strata CTX Programming Manual page 191

F
IELD
00 VM Port DN
01 Control Method
02 Send A/D Tone
03 Send B Tone
04 End-to-end
Strata CTX Programming - Part 2: CTX WinAdmin Programming 04/03
D
ESCRIPTION
Enter the DN of an individual VM port. For direct transfer to voice mail, enter
the remote Node ID and Pilot DN.
Note Do not enter a Pilot DN. This feature is available only with CTX
Release 1.3 or higher software and with CTX WinAdmin Release 1.3
or higher software.
Possible values: Up to 5 digits (default = no value)
Specify In-band or SMDI integration. Select SMDI for Remote voice mail.
Possible values: Inband or SMDI (default = no value)
Select whether Strata CTX sends A or D tone when a station connecting to
voice mail answers or disconnects.
Possible values: Enable or Disable (default = no value)
Enable Strata CTX to send B tones in the event of a Blind Transfer Recall.
Possible values: B Tone, No Tone or B Tone and Extension Number (default =
no value)
Enable Strata CTX to send DTMF tones to voice mail in response to key
presses from a digital telephone.
Possible values: Enable or Disable (default = no value)
Services
540 Pilot DN Assignment
9-5