Data Backup - Toshiba Strata CTX Programming Manual

910 Data Backup

Prerequisite Program:
This program enables you to backup programmed data from Strata CTX to a SmartMedia Card.
1. Install the SmartMedia Card into the designated slot of the Strata CTX processor.
The SmartMedia card must be
Note
formatted by Strata CTX and
the "Progdata" folder must be
empty (no Default.dat file)
2. From the Program Menu, click
Operation > Data Backup.
3. Select the Backup button. Click
Cancel to interrupt the selected
function.
4. Click Backup.
5. The Progress field displays the
progress of the selected function.
F
IELD
Backup
Completion
Strata CTX Programming - Part 2: CTX WinAdmin Programming 04/03
908 on page 10-4
D
ESCRIPTION
Select one of the following buttons. When performing a Backup, you must use a
formatted SmartMedia card.
•
Backup – Backup Strata CTX data to SmartMedia card. This creates a
Default.dat file under the Progdata folder of the SmartMedia card.
Notes
•
Default.dat is the name of the file that is created and it contains all Strata
CTX programmed data. It is not default data. It is data that is currently
programmed in the Strata CTX.
•
The Progdata folder on the SmartMedia card must be empty before trying to
backup data. You can use FTP to copy and delete an existing default.dat file.
• Cancel – Cancel the Backup/Restore function.
Current Status of Backup.
Possible values: Completed successfully, Not completed.
Operation
910 Data Backup
10-13