Toshiba Strata CTX Programming Manual page 401

Strata CTX BRI Video Conferencing Programming
The table below shows the programs required to program a PRI line to ring to a RBSU interface to allow
for Video Conferencing capabilities.
The following may differ in your system: card slot assignments, trunk groups, channel groups and BRI
station numbers.
The following program changes are required once the system has been installed and initialized.
Programs
Program 100
Program 105
Program 304
Program 306
Program 309
Program 302
Program 320
Program 202
Strata CTX Programming - Part 4: Appendices 04/03
Card Assignment
105=RPTU and 107=RBSU S/T Interface with each two TIE's
System Data
Primary Clock, FB21=RPTU card slot, 10501
Incoming Line Groups
ILG=1, FB1=ISDN, FB2=CO, FB3=DID, FB4=Standard
Outgoing Line Groups
OLG=1, FB1=ISDN, FB2=CO/DID, FB3=Standard
Direct Inward Dialing
ILG=1, FB1=3000, FB5 through FB10=Dialing Digits with Destination Digits 3000
PRI Trunks
Channel Group=1, FB1=010501, FB2=Nat'l ISDN, FB3=1, FB4=1, FB7=24,
FB 8=Enable, FB9=Enable, FB11=Enable, FB12=Enable, FB19=Enable
"B" Channels
FB00=010501, FB1 through FB23=Enable
ISDN BRI Station
Prime DN=3000, FB1=010701, FB2=2, FB3=Nat'l ISDN, FB4=Point to Multi-Point,
FB13=Enable, FB14=Enable
Prime DN=3001, FB1=010702, FB2=3, FB3=Nat'l ISDN, FB4=Point to Multi-Point,
FB13=Enable, FB14=Enable
Prime DN=3002, FB1=010703, FB2=4, FB3=Nat'l ISDN, FB4=Point to Multi-Point,
FB13=Enable, FB14=Enable
Prime DN=3003, FB1=010704, FB2=5, FB3=Nat'l ISDN, FB4=Point to Multi-Point,
FB13=Enable, FB14=Enable
Note FB2 must be a different channel group for each BRI station and cannot
conflict with PRI channel group.
Applications, Tips and Tricks
Strata CTX BRI Video Conferencing Programming
Description
A-5