Button Programming Procedure - Toshiba Strata CTX Programming Manual

)%
5. Press . Press
)%
6. Press . Press
)%
7. Press . Press
)%
8. Press . Press
)%
9. Press . Press
)%
10.Press . Press
+ROG
11. Press
Now that you are more familiar with the Strata CTX button programming interface, begin programming
your Strata CTX system starting with Step 1 below.

Button Programming Procedure

Step 1: Enter Program Mode
Enter the button sequence displayed below to enter the CTX670 programming interface from a DKT
station.
1. Log in by pressing:
2. At the PASSWORD=
+ROG
3. Press .
Step 2: Enter Program Number
1. At the
PROG=
2. Programmable parameters are identified by the FB LEDs that are illuminated on the DKT. Go to
"Choose a Button Sequence"
...or if there are no illuminated FB LEDs, continue to Step 3.
Step 3: Enter FB00 Parameters
)%
parameters designate a specific station, trunk, or circuit to be programmed. The
EQUIP= , DN= , INDEX=
)%
1. At the prompt, enter the desired value using the telephone number pad.
+ROG
2. Press .
Step 4: Choose a Button Sequence
➤
Select the button sequences based on the programs required for programming the Strata CTX from the
Telephone. For 100~900 series programs, refer to pages 13-11~13-94.
Program Listings
This table is a list of programs found in this chapter.
Program
Number
100
102
Strata CTX Programming - Part 3:Telephone Button Programming 04/03

to set ABR to attempt redials in 60 second increments and press

to set the ABR Recall Timer and press

to set the Hold Recall Timer and press

to set the First Interdigit Timer and press

to set the Second Interdigit Timer and press

to set the Ring Transfer No Answer Timer and press
to return to the prompt.
PROG=
+ROG ✱ ✱ ✱✱✱
prompt, enter your password. Default is
prompt enter the three digit program code (e.g.,
on page 13-7
, etc.) appears automatically in the LCD screen.
Card Slot Assignment
Flexible Access Codes
+ROG
+ROG
+ROG
+ROG
.


)%QQ
Press on the related
Program Name
Telephone Button Programming
Button Programming Procedure
+ROG
.
.
.
.
+ROG
twice.
.
+ROG
) and press .
button to program a parameter.
)%
prompt (e.g.,
.
13-7