Destination Restriction Wizard; Wizard Buttons - Toshiba Strata CTX Programming Manual

Services

Destination Restriction Wizard

Destination Restriction Wizard
This wizard guides you through the necessary steps (Programs) to configure Destination Restriction (DR).
You can skip steps in this wizard if they do not apply to a particular DR application.
➤
Select Service > Setup
Wizard > Destination
Restriction.
The wizard starts with a screen
that displays all the steps and
programs for setting up DR.
There are 10 steps to this
wizard.
➤
Click Start to go through
the wizard sequentially
...or you can select any step
to go to that step directly
(Example: clicking on Step
5 takes you to Program 103
Class of Service).
Notes
To back out of one step and go to another step, click Destination Restriction on the left pane and then
G
click the Step.
You don't have to go through every step of the wizard.
G
Tool tips provide necessary programming information.
G

Wizard Buttons

These buttons appear on some of the wizard screens. Clicking on any button lets you do the following:
• Start – starts the DR wizard.
• Add/Delete/Modify – enables you to add/delete/modify entry(s).
• Copy – enables you to copy all the information from one screen to another.
• Back/Next – enables you to navigate forward and backward through the screens.
• Table View – displays the appropriate table view. For example, clicking the DR Table View button
displays all the configured DRLs within the system.
• Print – enables you to print to a local printer.
• Refresh – enables you to get the most updated information.
9-58
Strata CTX Programming - Part 2: CTX WinAdmin Programming 04/03