Program Update - Toshiba Strata CTX Programming Manual

Telephone Button Programming
900 Series Programs
➤
To view Backup progress
1. While the program is running (
files to be transferred.
)%
2. Press
3. The Backup is complete when
4. To verify success, push
5. Press
Do not press the
Note
To Restore data from the SmartMedia card to Strata CTX, see

Program Update

This program enables you to update the Strata CTX programs.
Program Number(s): 911
Prerequisite Program:
Reference:
Access Sequence:
FB Name
Update Function
Total Blocks
Copied Blocks
Active Side Status
Stand by Side Status 05
Active Side Number
Status
13-104
)%
to view the current file number that is being transferred.
)%
)%
. Your telephone LCD should indicate *1.ALL_OK .
+ROG
to exit.
+ROG
button. Pressing the
Format SmartMedia Card
None
Login to programming mode from your telephone button pad:
+ROG ✱ ✱ ✱✱✱.
At the PASSWORD= prompt, Enter your password and press +ROG.
At the PROG= prompt enter  and press +ROG.
FB Summary
01 Enter 1 or 2 to identify the type of Update
intended.
Select 3 to cancel a running update.
02 View total blocks to be updated (total blocks
will vary depending on software versions).
03 View number of blocks copied.
04 Backup Type Display
Stand by Backup Type
06 Active Side Number.
07 View Backup Status.
)%
and blink green), press
blinks intermittently.
+ROG
button restarts the Backup procedure.
"System Initialize"
Strata CTX Programming - Part 3:Telephone Button Programming 04/03
)%
to view the total number of
on page 13-94.
Value LCD Prompt
1:Update 1:Update
2:Reboot 2:Reboot
3:Cancel 3:Cancel
0~65536 (CTX670) n/a
0~128 (CTX100)
default = 0
0~65536 (CTX670) n/a
0~128 (CTX100)
default = 0
1:Normal 1:Normal
2:Trial 2:Trial
3:Fault 3:Fault
4:Don't Care 4:Don't Care
5:Error 5:Error
1:Normal 1:Normal
2:Trial 2:Trial
3:Fault 3:Fault
4:Don't Care 4:Don't Care
5:Error 5:Error
0 or 1 ACT SIDE=
default = 0
1:Idle 1:Idle
2:Running 2:Running
3:Success 3:Success
4:Error 4:Error