Mapping - Toshiba Strata CTX Programming Manual

Mapping

Programs Used: 657, 658, 659 and 660
The following programs map network and local COS, DRL, FRL and QPL settings to each other.
1. Complete the
Record Sheets"
2. From the Program Menu, click
Services > Networking > Mapping.
3. Enter Program 657 data.
4. Enter Program 658 data.
5. Enter Program 659 data.
6. Enter Program 660 data.
7. Click Submit.
657 Network COS Mapping Table
Prerequisite Program:
This table maps a Network COS received as part of a Traveling Class Mark to a local Class of Service for
access to local services. There is no translation of Outgoing Network COS.
F
IELD
Ntwk COS
01 Local COS
02 Off-hook Call Announce
03 System Speed Dial
04 COS Override
05 TGAC Override
Strata CTX Programming - Part 2: CTX WinAdmin Programming 04/03
"Network Mapping
on page D-50.
None
D
ESCRIPTION
Enter the Network COS to be mapped.
Possible values: 1~32 (default = no value)
Enter the Local COS to be used in place of the received Network COS.
Possible values: 1~32 (default = no value)
Choose whether an incoming call with this Network COS can activate OCA.
Possible values: Enable or Disable (default)
Choose whether an incoming call with this Network COS can use a System
Speed Dial number to make an outgoing call.
Possible values: Enable or Disable (default)
Choose whether an incoming call with this Network COS can use Class of
Service Override.
Possible values: Enable or Disable (default)
Choose whether an incoming call with this Network COS can override local
Trunk Group Access Control. Typically an attendant function.
Possible values: Enable or Disable (default)
Services
Networking
9-43